Morris Brothers (Tunstall) Limited was formed and incorporated in 1948 by the brothers, Fred and Harry Morris. It has remained within the family through four generations. The Company began offering a specialised engineering service to the local pottery industry and the manufacture of industrial fans.
Early in its existence it became involved with precast concrete manufacturers and soon the company resources were honed and directed virtually exclusively to the design and production of the tooling and associated equipment.
Early in its existence it became involved with precast concrete manufacturers and soon the company resources were honed and directed virtually exclusively to the design and production of the tooling and associated equipment.
Services
Shown below is a basic pressing process common to most single and three stage presses. Machinery and equipment can vary from semi-automatic to fully automatic dependant on customer needs and can be designed to suit your specific requirements.
Whether you are using a single stage or a three stage press the pressing process is basically the same; the filling of a mould with wet concrete, pressing the concrete until hard, ejecting and stacking the finished product.These aggregates are precisely weighed and batched according to the mix design and dispensed into the mixer.
Whether you are using a single stage or a three stage press the pressing process is basically the same; the filling of a mould with wet concrete, pressing the concrete until hard, ejecting and stacking the finished product.These aggregates are precisely weighed and batched according to the mix design and dispensed into the mixer.
Two columns are passed through the assembled units and securely tightened using four split nuts. The table is rotated by means of rack and pinion, and powered by an inverter driven 22kw motor and gearbox. The oil is then distributed to the machines cylinders by way of directional control and pressure relief valves, giving a recommended main ram pressure of 2240 psi.
There is a 14 stroke hydraulic cylinder incorporated within a steel fabricated frame for the removal of the finished pressed products. This power is from a free standing power pack which houses a 25 - 30 kw motor, which drives a 19 gpm variable displacement pump. The oil is then distributed to the machines cylinders by way of directional control and pressure relief valves, giving a recommended main ram pressure of 2240 psi.
Morris Brothers manufacture a wide range of dispensing systems to suit the production of hydraulically pressed concrete products. The volumetric is a simple, but effective design and has been widely used in the industry since the 1970's. It enables accurate amounts of measured concrete to be dispensed into the press moulds, which ultimately gives a constant product thickness.
We have been leaders in the manufacture of handling and control systems for the concrete pressing industry for over 40 years. All our machines are designed and built to meet individual customer requirements, as we understand the ever changing demand for new products within the market.
Most machines are capable of handling both simplex and duplex slab or kerb, and with the kerb machines, 3 - 4 layers can be achieved with the use of our automatic paper placer.All of our automatic machines come fitted with a pallet magazine capable of storing up to 8 - 10 pallets.
Most machines are capable of handling both simplex and duplex slab or kerb, and with the kerb machines, 3 - 4 layers can be achieved with the use of our automatic paper placer.All of our automatic machines come fitted with a pallet magazine capable of storing up to 8 - 10 pallets.
Reviews
Be the first to review Morris Brothers.
Write a Review
