15 years ago we started manufacturing LPHW (Low Pressure Hot Water) natural convection trench heater units which continue to be very popular. Trench Heating Limited moved to its own factory dedicated to the manufacture of a comprehensive and high quality range of trench heater products in Pulloxhill, Bedfordshire six years ago.
Our aim is to produce a high quality product at a competitive market price. We have the ability to manufacture bespoke units with detailing such as saddles, insets, mitres and curved profiles to fit most site profiles. Over the last few years we have developed, in collaboration with SIEMENS and other component parts manufacturers, a range of high quality Fan Assisted Electric and Fan Assisted LPHW trench heaters.
Our aim is to produce a high quality product at a competitive market price. We have the ability to manufacture bespoke units with detailing such as saddles, insets, mitres and curved profiles to fit most site profiles. Over the last few years we have developed, in collaboration with SIEMENS and other component parts manufacturers, a range of high quality Fan Assisted Electric and Fan Assisted LPHW trench heaters.
Services
Trench heating is a favoured way of providing a heating system in front of full height glazing. When placed in front of glazing trench heating will counteract down draughts and eliminate condensation. Trench heating can be used as a primary or secondary source of heat in any room. It is used extensively in both commercial and domestic environments.
The natural convection trench heater range of units represent the core of our product range. LPHW (Low Pressure Hot Water) natural convection. The cold air drops down into the trench casing and is warmed as it passes upwards over the finned element banks which consist of copper pipes expanded onto aluminium fins.
Please let us know your requirements and we will do whatever we can to help. Please note that unless otherwise detailed our quotations will be for NATURAL SATIN ANODISED ALUMINIUM GRILLE and ANGLE. All other variations from this are available at an ADDITIONAL cost. ALUMINIUM, STAINLESS STEEL and POWDER COATED grilles are 6 mm wide x 22 mm deep with a free area of 50%.
Put the trench heater into the floor opening and if in more than one piece, join together using the bolts provided. Level the top of the trench to the finished floor level along the length of the trench run using M10 adjustable splayed feet/studs, up to 30mm adjustment is possible. If the grille retaining angle is recessed, use the grille provided to find the finished floor level.
Reviews
Be the first to review Trench Heating.
Write a Review
